JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Most displays have a black back, which looks best when you attach a black display adapter. Vogel’s offers a modular system for its display mounts which makes it possible to choose black or silver color for each separate component of the mounting system.
In general, a silver extension tube goes best with a white or lightly colored ceiling. For black or dark colored ceilings, it’s better to choose a black extension tube.
The PFA 9010 ceiling plate is designed to be installed on both flat and slanted ceilings. With one ceiling plate you have a solution for both types of ceilings.
Drilling a hole with the right diameter and depth is the key to installing the most secure ceiling or wall mount. If the hole is too large, the plug can come loose. If the hole is too small, it can cause fractures in the bolt. Do never make a too small hole wider with the same drill instead use a larger drill of the right size. Tip: blow into the hole through a hose or straw to get rid of extra grit, but make sure to wear eye protection.
When installing a lift system in a plastered ceiling, make sure that the plaster is not filled in completely around the lift plate. Always make sure that a service opening is left in the plaster work so that you can access the lift if needed.
Several displays can be easily stacked on a vertical extension tube using tilt & turn units, the PFA 9001, PFA 9002 or PFA 9030. Simply mount them above each other on a standard 60 mm wide Vogel’s PFA tube.
The 20 x 20 cm mounting pattern is being used more frequently for displays. The FAU 3125 adapter has been specially made for this hole pattern.
Our Pro-AV Mount Advisor helps you to find the right mounting solution for your display.
With the modular display adapters, FAU 3125 and FAU 3150, both display positions are covered so you do not need two different mounting systems. The display can be positioned in portrait or landscape mode and it is very easy to change modes.
Vogel’s has made drilling in the round PFA extension poles easy for you. A special drill groove has been placed in the side of the poles as a marker point for your drill bit. When you are using the PFA 9010 ceiling plate, it is even easier to drill because of the integrated pre-drill pattern. These are real time saving features.
The PFT 2100 trolley comes with wheels to use it as a cart and with four leveling feet to use it as a stationary floor stand.
The mounting strips of the FAU 3150 can be positioned at different heights on the basic mounting plate. This is giving you extra flexibility in positioning the display at different heights.
Anti-theft lock options are available for the PFW 920/930, PFW 5000 and PFW 9000 series. The modular PFW 910 wall mount is so flat to the wall that the PFA 9008 anti-theft lock will not fit.
The display interface FAU 3150 includes a set of short and long mounting strips. With this you can pick the best fitting and best looking strips for your display.
The turn and tilt units, PFA 9001, PFA 9002 and PFA 9030, will fit on any metal 60 mm pole. This makes it very easy to make your own custom solution based on a standard 60mm pole, eg. for exhibitions or trade shows. Be careful with the length of the poles and weight of the display when you design a custom solution. Ceiling to floor use is also easy, even with multiple units on one pole. For this set-up, use PFA 9028 as the floor and ceiling mounting plate.