JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Impressive audio that turns with your TV
TVs are becoming thinner and lighter. This is at the expense of the sound quality. This, however, will not be an issue thanks to the SoundMount™. This TV bracket combines our high-end swivelling wall support (Vogel's DesignMount) with an built-in sound bar (including a wireless subwoofer). You can enjoy the best picture and audio from every place in a room with this.
All-in-one: swivelling wall bracket + built-in sound bar + wireless subwoofer
The SoundMount (NEXT 8365) is a unique wall bracket with built-in sound bar. Use it to optimise your viewing and listening experience with one elegant solution. This product guarantees impressive sound quality that turns with your TV and makes your films and music come alive.
Check compatibility by entering your TV brand and model. The model number is usually displayed on a sticker at the back of the TV. For example: 'LG OLED55C7V'
A TV wall mount entirely designed to bring you the best viewing pleasure
"A true symbol of product design excellence. The iF Awards are one of the oldest truly independent design institutions in the world and recognized as a symbol of design excellence around the world. Yearly the iF International Forum Design GmbH receives around 5,000 submissions, from 70 countries. "
"A quality mark for good design. The Red Dot Design Award is an international prize for quality marks for good product design. Since 1955 this award is yearly accredited by the Design Zentrum Nordrhein Westfalen. Yearly around 11,000 entries from 61 countries subscribe for the awards. "
This product passed extensive tests to guarantee compliance with the TÜV Nord quality standard. Products are tested to carry at least 3 times the indicated weight for domestic related products and at least 5 times for professional products without collapsing. TÜV NORD is an independent certification authority and recognized globally as the label of excellent quality.
40 inch (102 cm). The width of the soundbar corresponds to a 40-42 inch TV.
65 inch (165 cm) and maximum weight is 30 kg. The Screen Protection System (SPS®) with anti-bump is active up to a screen size of 65 inch.
There is no tilt, because the sound from the soundbar needs to point to the ears of the viewer(s) to get the best audio experience. There needs to be a ‘line of sight’ between the speakers in the soundbar and the ears of the viewer. In any tilt position, the sound would be pointed to the floor.
No, that’s not possible.
Vogel’s gives you a lifelong guarantee for defects in materials or manufacturing of the wall mount. The guarantee is 2 years for the soundbar, subwoofer and remote control.
No, Vogel’s only offers the complete solution: the SoundMount.
SoundMount: 300 Watt. Soundbar: 2x 75 Watt, subwoofer: 150 Watt.
Yes, the it can handle audio signals up to 192 kHz / 24 bit.
Yes, it is possible to stream audio via Bluetooth.
The weight of the soundbar is 3 kg.
The standby power consumption of the soundbar is less than 0.5 Watt.
The standby power consumption of the subwoofer is less than 0.5 Watt.
The width of the soundbar is 95 cm, equal to the width of a 40-42 inch TV.
There are in 6 speakers in the soundbar, 3 left and 3 right. Two squawkers and one tweeter per channel.
A Class-D (‘digital’) amplifier is used in the soundbar.
Technically it is possible. When available, the center output of a receiver can be connected with the AUX (analog) input of the soundbar.
With the HDMI ARC connection between the wall mount and the TV, picture and sound are automatically synchronized. Otherwise, set ‘audio delay’ in the setup menu of the TV.
ARC means Audio Return Channel. With HDMI ARC the digital audio signal is going from the TV to the soundbar (SoundMount).
It can handle PCM (digital stereo) signals. In case Dolby Digital or DTS signal is provided, the SoundMount will give an error message in the display of the soundbar. In setup menu of the TV, the audio output signal from the TV should be set to PCM (digital stereo).
Yes, with the soundbar remote control you can dim the light output of the display. The selected brightness level will automatically be stored.
Yes, it can. The optical S/PDIF (digital audio) connection can be used between the TV and the soundbar. In this case, control of the sound volume needs to be done with the included soundbar remote control.
To make it possible to control sound volume with your TV remote control, it is important that the HDMI CEC (Consumer Electronics Control) function is activated in the setup menu of your TV. This function has different name for each TV brand: Anynet (Samsung), Aquos Link (Sharp), Bravia Sync (Sony), Regza Link (Toshiba), Simplink (LG), Viera Link Panasonic), EZ-Sync (JVC), Easylink (Philips), Netcommand (Mitsubishi), Digital Link HD (Loewe).
Yes, a remote control is provided with the wall mount. This remote control is meant to be used for initial settings (personal settings like bass, treble, display brightness) and special functions like Bluetooth audio streaming. By means of the HDMI ARC connection between soundbar and TV, you only need your TV remote control to control sound.
Yes, the mount is automatically switched to standby (soundbar as well as subwoofer) when the TV is switched off and is switched on when the TV is switched on (when the TV and SoundMount are connected via HDMI ARC).
Without obstacles the wireless subwoofer works up to 10 meters away from the soundbar. With obstacles the reach is up to 5 meters.
Yes, both height and depth of the soundbar can be adjusted.
It is not possible to link the SoundMount with a Sonos speaker / system.
Peripheral equipment always needs to be connected directly to the TV.
Yes, it can be levelled in both directions.
Yes, subwoofer can be placed anywhere. There is no need for line of sight between subwoofer speaker and its listener. The maximum reach is 10 meters.
You only need one wall socket. A ‘power splitter’ is part of the SoundMount proposition and is included.
Yes, the drilling template is the same.
Yes, the NEXT 7840 cable cover can also be used. Please mount the SoundMount at a height of 116 cm from the floor.
Yes, all cables and mounting materials are included.
No, the subwoofer and the soundbar are already paired. In case pairing / link between subwoofer and soundbar is lost, link can be reactivated. See online NEXT 8365 Installation and operation manual.
The mains (AC) voltage range of the soundbar and subwoofer is 220 – 240 Volt, 50 / 60 Hz.
A lithium CR2025 battery.
Yes, the battery is included.
