THIN series - tilting

A slim and elegant TV wall mount to mount your tv as flat as possible.

Find a mount for your TV
THIN series - tilting is rated 3.0 out of 5 by 1.
  • y_2021, m_5, d_7, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_THIN_bv32_TV_bv32_mount_bv32_TILT, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vogels
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 186.06ms
  • REVIEWS, PRODUCT

Less annoying screen glare or flare

With the THIN tilt TV wall mount, your extra thin television can be stylishly attached to the wall. A TV wall mount with tilt function is often used for televisions that have to be mounted higher up a wall, for instance in the bedroom. By tilting the screen a few degrees, you create the perfect viewing angle for watching television from your bed. There is less annoying screen glare or flare on the screen.

And even though it is possible to tilt your TV 15 degrees, the TV wall mount remains almost invisible. This way all attention is given to the television, not to the wall mount!

Always straight thanks to the built-in spirit level

Almost every television, from 26 to 65 inch, fits on a THIN wall mount. And installing is very simple. The THIN has a built-in spirit level so you always hang the TV wall mount absolutely straight. Easy, and takes no time at all!

The Quality Signature

Choosing a Vogel's THIN wall mount is wanting so much more than a piece of metal you attach to the wall to showcase your television. It's a mount so thin, it's almost invisible. What's more: its quality has been thoroughly and manually tested. All part of 'The Quality Signature' by Vogel's, giving you the best of: reliability; design; innovation; ease-of-use.

Check compatibility by entering your TV brand and model. The model number is usually displayed on a sticker at the back of the TV. For example: 'LG OLED55C7V'

Additional installation materials are needed to install this screen. This will be automatically added to your shopping cart if you order this product from Vogel's, but you can also request the Vogel's Service / Adaptor Kit here. !

THIN series - tilting

A slim and elegant TV wall mount to mount your tv as flat as possible.

£89.95
Buy at an online store
    overlay

    Reviews

    Rated 3 out of 5 by from Flawed design. Let me start by saying this is the second mount from these guys the first been the very much more expensive thin 550 in our living room, like that this it’s a very nicely made bit of kit. However this product does seem to be flawed in more than one way.. First issue, the mounting arms to the tv, the bolts supplied for my TV were M8x30 hex head bolts, when mounted as per instructions (+/-50mm from bottom edge) the bolts can’t be accessed with a socket due to the re-inforcment ribs that bend back over the hole area, the only way to get to them was a low profile thin spanner, fine if you’ve got one like me.. Second issue, the way the tv is removed from the wall mount means you have to pop the bottom edge of the mount off the rail, the first time we did this resulted in the mount bending where it holds the rubber retaining feature (see image) the aluminium in this region is just too thin especially when trying to manoeuvre a large tv, fortunately I was able to heat and straighten this but it will snap next time the tv is removed I’m sure of it. Third issue, once the tv is on the wall you can push the tv back and forth adjusting the angle of TV, however although you can push the tv back to vertical and it clips in place it doesn’t actually stay sat vertical and is always slightly falls forward, I wouldn’t expect this on a £15 mount never mind a mount costing this much. Fourth isssue, the pivot arms on my mount were of different tensions to pull in and out and one arm had significant amounts of play in the mechanism, I had to re-tighten the pinch bolts, these were threadlocked so shouldn’t have needed any attention, just poor QC on accembly in my opinion. If I’m honest I’m very dissapointed and if I hadn’t already had to adjust the wall bracket due to a misaligned hole on my behalf I would have returned the mount.
    Date published: 2020-12-01
    • y_2021, m_5, d_7, h_17
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_GB, sid_THIN_bv32_TV_bv32_mount_bv32_TILT, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_vogels
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 13.97ms
    • REVIEWS, PRODUCT

    Downloads For