PPL 2500 Projector lift system
The PPL 2500 projector lift system is the perfect solution for the integration of a large projector at a ceiling for example in an auditorium or conference hall.
The lift is equipped with a heavy-duty but silent motor which assures a fast and stable up-down movement of the projector. Furthermore, the motor is provided with an RF remote controller and offers the possibility to set three motor limit stops: an upper, intermediate and a down stop. The intermediate stop can be set at the desired height for projection mode, whereas the down one can be adjusted up to 500 cm stroke and can be used as a service mode position.
The maximum weight capacity of the projector lift is 70 kg.
This lift has been developed to be installed inside a false ceiling where very few space is available. Inside the false ceiling only a minimum height of 13 cm is required to install lift and projector. The motor allows a drop of 35 cm.
The maximum weight capacity of the projector lift is 15 kg.
The PPL 2035 is supplied with extendable side brackets in order to position the ceiling tile exactly in the ceiling tile grid. The lift is equipped with two safety screws that prevent the lift to extent further to the preset end stop.
This lift is also available as a 120 V, 60 Hz version.
Awards and certificates
TÜV NORD is an independent certification authority for products and manufacturing processes. They carry out independent quality and safety tests and are recognized globally as the label of excellent quality. All certified products for professional use are tested to carry at least 5 times the indicated weight without collapsing (deformation is possible).