Have you purchased a Vogel's MotionSoundMount (NEXT 8375) about which you still have some questions? Or are you looking for additional information before you decide to buy this motorized TV mount? Find the answers here.
The MotionSoundMount (NEXT 8375) is a flexible TV mount with integrated soundbar and wireless subwoofer that offers the very best in wall mount technology.
40 inch (102 cm). The width of the soundbar corresponds to a 40-42 inch TV.
65 inch (165 cm) and maximum weight is 30 kg. The Screen Protection System (SPS®) with anti-bump is active up to a screen size of 65 inch.
There is no tilt, because the sound from the soundbar needs to point to the ears of the viewer(s) to get the best audio experience. There needs to be a ‘line of sight’ between the speakers in the soundbar and the ears of the viewer. In any tilt position, the sound would be pointed to the floor.
No, that’s not possible.
Vogel’s gives you a lifelong guarantee for defects in materials or manufacturing of the wall mount. The guarantee is 2 years for the soundbar, subwoofer, remote control and motor units and electronics.
No, Vogel’s only offers the complete solution: the MotionSoundMount.
The standby power consumption is less than 0.5 Watt.
Yes, it is possible to turn the TV manually.
The integrated slip-hinge and electronic protection circuit (which switches off the motors in case of too much friction), pinching will be prevented.
MotionSoundMount: 300 Watt. Soundbar: 2x 75 Watt, subwoofer: 150 Watt.
Yes, it handle audio signals up to 192 kHz / 24 bit.
Yes, it is possible to stream audio via Bluetooth.
The weight of the soundbar is 3 kg.
The standby power consumption of the soundbar is less than 0.5 Watt.
The standby power consumption of the subwoofer is less than 0.5 Watt.
The width of the soundbar is 95 cm, equal to the width of a 40-42 inch TV.
There are in 6 speakers in the soundbar, 3 left and 3 right. Two squawkers and one tweeter per channel.
A Class-D (‘digital’) amplifier is used in the soundbar.
Technically it is possible. When available, the center output of a receiver can be connected with the AUX (analog) input of the soundbar.
With the HDMI ARC connection between this wall mount and the TV, picture and sound are automatically synchronized. Otherwise, set ‘audio delay’ in the setup menu of the TV.
ARC means Audio Return Channel. With HDMI ARC the digital audio signal is going from the TV to the soundbar (MotionSoundMount).
It can handle PCM (digital stereo) signals. In case Dolby Digital or DTS signal is provided, the MotionSoundMount will give an error message in the display of the soundbar. In setup menu of the TV, the audio output signal from the TV should be set to PCM (digital stereo).
Yes, with the soundbar remote control you can dim the light output of the display. The selected brightness level will automatically be stored.
Yes, it can. The optical S/PDIF (digital audio) connection can be used between the TV and the soundbar. In this case, control of the sound volume needs to be done with the included soundbar remote control.
To make it possible to control sound volume with your TV remote control, it is important that the HDMI CEC (Consumer Electronics Control) function is activated in the setup menu of your TV. This function has different name for each TV brand: Anynet (Samsung), Aquos Link (Sharp), Bravia Sync (Sony), Regza Link (Toshiba), Simplink (LG), Viera Link Panasonic), EZ-Sync (JVC), Easylink (Philips), Netcommand (Mitsubishi), Digital Link HD (Loewe).
Yes, a remote control is provided. This remote control is meant to be used for initial audio settings (personal settings like bass, treble, display brightness) and special functions like Bluetooth audio streaming. By means of the HDMI ARC connection between soundbar and TV, you only need your TV remote control to control sound.
Regarding the ‘motion’ part, the TV automatically turns to the viewer (last position) when TV is switched on and automatically returns to the wall position when TV is switched to standby. For additional functionality, the MotionMount app can be downloaded from App Store / Google Play free of charge (search for ‘motionmount’).
Apple devices with iOS 8 and higher, with Bluetooth (iPhone: 4S and newer, iPad: 2 and newer, iPad Air: 1 and newer, iPad Mini: 1 and newer, iPod Touch) and most Android devices with Android OS 4.3 (Jelly Bean / v18) and higher, with Bluetooth. The following Android smart phones are guaranteed to support the MotionMount app: HTC U11, Huawei Mate 10 Pro, Mate 20, Mate 20 Pro, P10, P10 Plus, P20, P20 Pro, P Smart 2019, P30, P30 Pro and P30 Lite, LG G7 ThinQ, Samsung S8, S9, S10, A7, A8, A40, A50 and A70, Sony Xperia 10, Xperia XA2 and Xperia XZ3 and Nokia 8.
Up to ten preset positions can be stored.
Indeed, the app control makes use of Bluetooth (‘low energy’) 4.0 connection. The Bluetooth of your smartphone / tablet needs to be switched on while using the app.
The Freeze position function can be found in the app (Settings – Automatic Motion Management). In case Freeze position is disabled, your TV will return to last used position when TV is switched on. In case Freeze position is enabled, your TV will always return to the same position when TV is switched on.
Yes, it automatically switches to standby (soundbar as well as subwoofer) when the TV is switched off and is switched on when the TV is switched on (when the TV and MotionSoundMount are connected via HDMI ARC).
If you combine the MotionSoundMount with a recent LOEWE BILD TV (2016 and newer), it is possible to control also the motion of the MotionSoundMount with the LOEWE TV remote control.
Without obstacles the wireless subwoofer works up to 10 meters away from the soundbar. With obstacles the reach is up to 5 meters.
Yes, both height and depth of the soundbar can be adjusted.
It is not possible to link the mount with a Sonos speaker / system.
Peripheral equipment always needs to be connected directly to the TV.
Yes, it can be levelled in both directions.
Yes, subwoofer can be placed anywhere. There is no need for line of sight between subwoofer speaker and its listener. The maximum reach is 10 meters.
You only need one wall socket. An integrated ‘power splitter’ is part of the MotionSoundMount proposition.
Yes, the drilling template is the same.
Yes, the NEXT 7840 cable cover can also be used. Please mount the wall mount at a height of 116 cm from the floor
Yes, the NEXT 7840 cable cover can also be used. Please mount the wall mount at a height of 116 cm from the floor.
Yes, all cables and mounting materials are included.
Yes, you need to connect the power socket of the TV with the power cable from the MotionSoundMount. This makes that TV is automatically moving to last position when switching on the TV and is automatically moving back to the wall when TV is switched off.
No, the subwoofer and the soundbar are already paired. In case pairing / link between subwoofer and soundbar is lost, link can be reactivated. See online NEXT 8375 Installation and operation manual.
The mains (AC) voltage range is 220 – 240 Volt, 50 / 60 Hz.
A lithium CR2025 battery.
Yes, battery is included.
Click here to download the user manual or watch the installation video here:
For all other installation questions, see the Troubleshooter.
Would you like to take another look at this TV mount or its specifications? Take a look here!
Your question hasn't been answered, has it? Fill in our contact form and we will get back to you as soon as possible.