JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Kostenloser Versand
Auslieferung innerhalb von 2 bis 3 Werktagen
Passt nicht? Kostenlose Rückgabe
Have you purchased a SoundMount (NEXT 8365) from Vogel's, but do you have any questions? Or are you looking for additional information before you buy this TV mount? Find the answer here.
The SoundMount NEXT 8365 is a TV wall mount with integrated sound and offers the best in wall mount.
40 inch (102 cm). The width of the soundbar corresponds to a 40-42 inch TV.
65 inch (165 cm) and maximum weight is 30 kg. The Screen Protection System (SPS®) with anti-bump is active up to a screen size of 65 inch.
There is no tilt, because the sound from the soundbar needs to point to the ears of the viewer(s) to get the best audio experience. There needs to be a ‘line of sight’ between the speakers in the soundbar and the ears of the viewer. In any tilt position, the sound would be pointed to the floor.
No, that’s not possible.
Vogel’s gives you a lifelong guarantee for defects in materials or manufacturing of the wall mount. The guarantee is 2 years for the soundbar, subwoofer and remote control.
No, Vogel’s only offers the complete solution: the SoundMount.
SoundMount: 300 Watt. Soundbar: 2x 75 Watt, subwoofer: 150 Watt.
Yes, the it can handle audio signals up to 192 kHz / 24 bit.
Yes, it is possible to stream audio via Bluetooth.
The weight of the soundbar is 3 kg.
The standby power consumption of the soundbar is less than 0.5 Watt.
The standby power consumption of the subwoofer is less than 0.5 Watt.
The width of the soundbar is 95 cm, equal to the width of a 40-42 inch TV.
There are in 6 speakers in the soundbar, 3 left and 3 right. Two squawkers and one tweeter per channel.
A Class-D (‘digital’) amplifier is used in the soundbar.
Technically it is possible. When available, the center output of a receiver can be connected with the AUX (analog) input of the soundbar.
With the HDMI ARC connection between the wall mount and the TV, picture and sound are automatically synchronized. Otherwise, set ‘audio delay’ in the setup menu of the TV.
ARC means Audio Return Channel. With HDMI ARC the digital audio signal is going from the TV to the soundbar (SoundMount).
It can handle PCM (digital stereo) signals. In case Dolby Digital or DTS signal is provided, the SoundMount will give an error message in the display of the soundbar. In setup menu of the TV, the audio output signal from the TV should be set to PCM (digital stereo).
Yes, with the soundbar remote control you can dim the light output of the display. The selected brightness level will automatically be stored.
Yes, it can. The optical S/PDIF (digital audio) connection can be used between the TV and the soundbar. In this case, control of the sound volume needs to be done with the included soundbar remote control.
To make it possible to control sound volume with your TV remote control, it is important that the HDMI CEC (Consumer Electronics Control) function is activated in the setup menu of your TV. This function has different name for each TV brand: Anynet (Samsung), Aquos Link (Sharp), Bravia Sync (Sony), Regza Link (Toshiba), Simplink (LG), Viera Link Panasonic), EZ-Sync (JVC), Easylink (Philips), Netcommand (Mitsubishi), Digital Link HD (Loewe).
Yes, a remote control is provided with the wall mount. This remote control is meant to be used for initial settings (personal settings like bass, treble, display brightness) and special functions like Bluetooth audio streaming. By means of the HDMI ARC connection between soundbar and TV, you only need your TV remote control to control sound.
Yes, the mount is automatically switched to standby (soundbar as well as subwoofer) when the TV is switched off and is switched on when the TV is switched on (when the TV and SoundMount are connected via HDMI ARC).
Without obstacles the wireless subwoofer works up to 10 meters away from the soundbar. With obstacles the reach is up to 5 meters.
Yes, both height and depth of the soundbar can be adjusted.
It is not possible to link the SoundMount with a Sonos speaker / system.
Peripheral equipment always needs to be connected directly to the TV.
Yes, it can be levelled in both directions.
Yes, subwoofer can be placed anywhere. There is no need for line of sight between subwoofer speaker and its listener. The maximum reach is 10 meters.
You only need one wall socket. A ‘power splitter’ is part of the SoundMount proposition and is included.
Yes, the drilling template is the same.
Yes, the NEXT 7840 cable cover can also be used. Please mount the SoundMount at a height of 116 cm from the floor.
Yes, all cables and mounting materials are included.
No, the subwoofer and the soundbar are already paired. In case pairing / link between subwoofer and soundbar is lost, link can be reactivated. See online NEXT 8365 Installation and operation manual.
The mains (AC) voltage range of the soundbar and subwoofer is 220 – 240 Volt, 50 / 60 Hz.
A lithium CR2025 battery.
Yes, the battery is included.
Click here to download the manual or watch the installation video here:
In case of any other questions during the installation please check the Troubleshooter.
Would you like to have a look at the product or the specifications of this TV mount? Take a look here!
Your question hasn't been answered, has it? Fill in our contact form and we will get back to you as soon as possible.
